Volume Calculator
Pick a shape and enter its measurements to get the volume in m³, liters, cm³, cubic feet and US gallons.
Volume
30 m³
Liters
30,000 L
Cubic centimeters
30,000,000 cm³
Cubic feet
1,059.44 ft³
US gallons
7,925.16 gal
V = l × w × h = 4 m × 3 m × 2.5 m = 30 m³
This tool is for information only and is not a substitute for engineering advice. For orders such as concrete, fuel or water tanks, check the measurements and quantity with a professional.
How to calculate volume
Volume is the three-dimensional space an object takes up. For straight-sided shapes (a box, a room, a cylinder tank, a prism) it is the base area times the height. For pointed shapes (a cone, a pyramid) it is one third of the prism with the same base and height. A sphere needs only its radius.
Enter every measurement in the same unit. Mixing meters with centimeters makes the result 100 times off. The calculator converts each value to meters, finds the volume in cubic meters, then gives liters, cm³, cubic feet and US gallons.
Cube: V = a³Rectangular box: V = length × width × heightCylinder: V = π × r² × hSphere: V = 4/3 × π × r³Cone: V = π × r² × h ÷ 3Square pyramid: V = a² × h ÷ 3Triangular prism: V = (b × h ÷ 2) × LWorked example: a 4 × 3 × 2.5 m room
A room 4 m long, 3 m wide with a 2.5 m ceiling is a rectangular box.
V = 4 m × 3 m × 2.5 m = 30 m³30 m³ × 1,000 = 30,000 liters30 m³ ÷ 0.028316846592 = 1,059.44 ft³The room holds 30 m³ of air, which is 30,000 liters, 1,059.44 cubic feet or 7,925.16 US gallons.
Cubic meters, liters, cubic feet and gallons
A liter is a special name for one cubic decimeter (10 × 10 × 10 cm), so 1 m³ is exactly 1,000 liters and 1 liter is 1,000 cm³. The US gallon is defined as exactly 231 cubic inches.
| Unit | Liters | Cubic feet | US gallons |
|---|---|---|---|
| 1 m³ | 1,000 | 35.3147 | 264.172 |
| 1 L | 1 | 0.03531 | 0.26417 |
| 1 ft³ | 28.317 | 1 | 7.4805 |
| 1 US gal (231 in³) | 3.785412 | 0.13368 | 1 |
How many liters does a cylinder tank hold?
A cylinder tank's volume is π × r² × h. You usually measure the diameter; the radius is half of it. The table shows the full capacity of upright cylinder tanks.
| Inside diameter | Height 1 m | Height 2 m |
|---|---|---|
| 0.5 m | 196 L | 393 L |
| 1 m | 785 L | 1,571 L |
| 1.5 m | 1,767 L | 3,534 L |
| 2 m | 3,142 L | 6,283 L |
Concrete volume in cubic meters
A slab, footing or blinding layer is a rectangular box: length × width × thickness. Convert the thickness to meters first; 15 cm is 0.15 m.
V = 5 m × 4 m × 0.15 m = 3 m³A 5 × 4 m slab, 15 cm thick, has a geometric volume of 3 m³. Ask your supplier or site engineer how much extra to order for spillage and uneven ground; this calculator does not add any allowance.
Measuring tips
To find how much a tank or box holds, use its inside dimensions. Outside dimensions include the wall thickness and overstate the capacity. Measure a room's ceiling height in more than one spot, and use the triangular prism for a sloped attic.